Description
The CiT Crossfire is a serious bit of kit, a brilliantly crafted PC Gaming case featuring a high airflow layout and 4.0mm Tempered Glass Side Panel. This intelligent ATX case features a mesh front panel accompanied by six ARGB fans creating some stunning lighting effects.
We have made it even easier to control your ARGB fans with two different ways available to you. The Crossfire includes a 6-Port Hub controlled via either your Reset/LED Switch or Aura Sync. You can use the amazing colours the chassis has to offer thanks to the LED button, once the SATA is connected or use the ARGB motherboard connector and have access to even more striking colours. Once connected to a compatible motherboard you can customise your lighting using mobo software. Please note the CiT Crossfire is only compatible to work with motherboards that have a 5V RGB 3 Pin connection.
Moving onto the top of the case the I/O panel provides varied connectivity support with USB3.0 and USB2.0 connections and inside the Crossfire we have included a 6-port ARGB fan hub with controls for your LED lighting and have access to approximately 26 LED modes or to have access to 16.8 million colours using a compatible addressable RGB Motherboard or the Reset/LED switch on the top I/O panel.
This completely black interior has smart build potential with a spacious interior offering wide support for a range of gaming hardware to build a powerful effective gaming PC. It can fit a graphics card up to 35cm in length, CPU Cooler up to 16cm in height and can hold 3 x 2.5″ and 2 x 3.5″ drives. An ATX power supply unit measuring up to 180mm will fit inside.
Improve the overall performance of the Crossfire by taking advantage of the smartly designed interior, excellent build quality and flexible storage options with room for single & dual radiators, up to five hard drives (3 x 2.5″ / 2 x 3.5″) and support for higher end hardware.
Key Features
- Direct Airflow – Designed to improve the overall airflow of your system, the Crossfire front panel is made using mesh, allowing air to flow into the case easily without obstruction combining a super airflow performance with dust filtration.
- Six ARGB Fans with Powerful Airflow – Your components have never been easier to keep cool with six ARGB fans included & fitted you are ready to go straight out of the box. The Crossfire can also fit another two fans and installing an AIO water cooler with room to fit a 240mm radiator at the front and top and a 120mm at the back of the case.
- 6-Port Hub Included & Fitted – The Crossfire includes a fitted 6-Port Hub, allowing you to control your fans & lighting via either your Reset/LED Switch or Aura Sync for complete control options.
- Motherboard Sync – You can now take your colour customisation to new levels with the included Hub ARGB motherboard connector, simply connect the 3 Pin to a compatible motherboard and you can use the mobo software to sync your fans and have access to even more eye-catching LED lighting.
- Manual Fan Control – The Crossfire’s built-in 6-Port Hub can be controlled directly from your Reset/LED Switch, allowing full manual control even without an AURA compatible motherboard.
- Tempered Glass Panel – An edge to edge 4.0mm tempered glass side panel has been included allowing the user to show off their finished build and it also shows off the glow from the included ARGB fans.
- Full-Length PSU Shroud – To keep the interior looking neat and tidy the Crossfire has a dedicated PSU Shroud that is made with solid steel panelling that perfectly covers the cables and showcases the PSU specs.
- ATX Housing – Standing at 460mm high, 205mm wide and 410mm deep the Crossfire is compatible with a wide range of components, with 350mm of clearance for GPUs and it can facilitate CPU coolers up to 160mm tall. There are seven expansion slots on the rear panel for PCIe devices. Plenty of room for high-end builds.
- I/O Panel – Providing you with a varied connectivity support, the Crossfire has a fully equipped I/O panel featuring one USB 3.0, two USB 2.0 and HD Audio, as well as an LED button (Reset Switch).
Specifications
Chassis Dimensions (Excluding Fascia / Panels): | (W) 200 x (H) 433 x (D) 375mm |
Water Cooling Support: | |
Front Supported Radiator(s): | 120mm and 240mm |
Top Supported Radiator(s): | 120mm and 240mm |
Rear Supported Radiator(s): | 120mm |
Cooling Fan: | |
Fan Powered Via: | 3pin Fan Connector |
Fan LEDs Powered Via: | 3pin AURA |
Fan Controller Support: | |
Fan Controller Included: | Yes |
Fan Controller Power Via: | SATA Connector |
LED Controller: | Yes |
Fan Power Connector: | 3 or 4pin |
LED Power Connector: | 3pin AURA |
Fan Control Via: | Reset / LED Switch |
Supported Qty of Fans (Max.): | 6 |
Supported Qty of LEDs (Max.): | 6 |
Additional Chassis Specifications: | |
PSU Max. Length: | 180mm |
Packaging Type: | EPE Foam |
Case Specifications
Form Factor: | Midi Tower |
Motherboard Support: | ATX, Micro ATX, Mini ITX |
PSU Support: | Standard ATX |
PSU Location: | Bottom |
Gaming Case: | Yes |
Water Cooling: | Water Cooling Ready! Supported Radiator Size: 240mm Supported Radiator Positions: Front, Top |
Body Material: | 0.5mmSPCC |
Front Bezel Material: | ABS & Mesh |
Side Panel: | 4mm Tempered Glass |
Internal Cable Management Depth: | 15mm |
External Bays: | |
Internal Bays: | 7 x 3.5” Internal 3 x 2.5” Internal |
Drive Bay Notes: | |
Expansion Slots: | 7 x Full Size |
Cooling Front: | Space For 3 x 120mm or 2 x 140mm Fans (3 x 120mm ARGB Fans Included) |
Cooling Top: | Space For 2 x 120mm or 2 x 140mm Fans (2 x 120mm ARGB Fans Included) |
Cooling Rear: | Space For 1 x 120mm Fan (1 x 120mm ARGB Fan Included) |
Cooling Side: | None |
Cooling Bottom: | Space for 2 x 120mm Fans (On PSU Cover – Not Included) |
Fan Controllers: | 1 Fan Controllers, controlling up to 6 fans in total |
IO Ports: | 1 x USB 3.0 2 x USB 2.0 1 x HD Audio 1 x Microphone |
GPU Max Length: | 350mm |
CPU Cooler Maximum Height: | 160mm |
Front Bezel Colour: | Black |
Body Colour: | Black |
System Cabinet Features: | |
PSU Included: | No |
Reviews
There are no reviews yet.